Residential/Commercial
GIT-3A and GIT-4 Automatic Gutter Ice Melting Control
The computerized patent pending GIT–3A Automatic Gutter Ice Melting Control operates ice melting heaters only while required thus insuring energy efficiency and low operating costs. The GIT–3A senses both moisture and temperature conditions in the gutter or down spout thus assuring optimum control.
Snow and Ice Sensor
Gutter Ice Melting Control
- Automatic gutter ice melting control
- Energy efficient
- Minimum operating cost
- Maintains ice melting heater efficiency
- Field proven reliability
- UL and CUL listed to standard 873
- Low cost
- Simple installation
- GIT-3A 120/240 Diagram
Snow and Ice Sensor
Gutter Ice Melting Control
- Automatic gutter ice melting control
- Energy efficient
- Minimum operating cost
- Maintains ice melting heater efficiency
- Built-in ground fault equipment protection(GFEP) for safety
- UL and CUL listed to standard 873
- Remote monitor and control included
- low cost
- simple installation
- GIT-4 120/240 Diagram
Freeze Protection Thermostat
The C-UL-US listed SST-1A and SST-2 Freeze Protection Thermostats replace electromechanical thermostats in cost-sensitive applications requiring ground fault equipment protection (GFEP). The sst-1A and SST-2 ate listed by Underwriters Laboratories to Standard UL 873 for Temperature-indicating and –Regulating Equipment.
Automatic Snow/Ice Melting System Control Panel
The APS-3C Snow Switch when used with compatible sensors automatically controls snow/ice melting heaters, ensuring minimum operating costs. Typical applications include pavement, sidewalk, loading dock, roof, gutter and down spout snow/ice melting. The APS–3C is interchangeable with earlier APS–3 models.
Model CIT-1 Snow Sensor
The CIT-1 Snow Sensor detects falling or blowing precipitation as snow at temperatures below 38°F (3.3°C). The CIT-1 provides the industry’s most versatile and cost effective automatic snow melting control when used with an APS-3A, APS-3B, APS-4 Control Panel.
Pavement-Mounted Snow and Ice Sensor
The SIT-6E, which replaces the SIT-5E, reliably detects snow and ice conditions on pavement surfaces. This ensures that deicing heaters operate only while needed which minimizes energy costs without sacrificing snow melting effectiveness. A built-in, hold-on timer keeps heaters operating for an hour after snow stops to help ensure complete snow melting.
Model GIT-1 Gutter Ice Sensor
An automatic control system for gutters and downspouts, employs one or more GIT-1 Gutter Ice Sensors and either an APS-3B, or APS-4 control Panel. Heaters operate only if moisture occurs at temperatures below 38°F(3.3°C), thus saving energy and ensuring reliable ice melting.
TF4X40 Thermostat
These thermostats are used for controlling heat tracing systems in ordinary location. The capillary bulb should be mounted on the side of the pipe.
The TF4X40 is used for controlling heat tracing systems in ordinary locations. The capillary bulb should be mounted on the side of the pipe.
- Economical Pipe Sensing Temperature Control
- Electrical Data 22 amp resistance 250VAC
- Single Pole Single Throw
- Nema 4X, IP66 corrosion resistant
- Capillary Length 3ft
- Material Copper
- Max Bulb Temp 60°F (140°C)
- Watertight
- Fixed Temperature Range 40° F (4.4° C)
Industrial
1660-18911
The 1660-18911 thermostat is a watertight, dust tight and corrosion resistant temperature control in a lightweight die cast enclosure with an internal calibrated reference dial and tamper-proof adjustment for outdoor or indoor locations. The liquid-filled thermal system, with its stainless steel sensor stem, provides a very dependable and accurate control system.
- Die Cast aluminum with polyamid epoxy coating
- Watertight, dust tight and corrosion resistant
- Nema 4X
- SPDT UL listed with internal calibrated reference dial and tamper-proof adjustment
- 22 amps at 480 VAC
- Range – 15° – 140°F
- Sensor – 304 SS Sensor stem
Custom and standard control schemes from our U.L listed panel shop. Proportional temperature controls, thermocooplier, RTD’r, staging and sequence control, touch screen and PLC and special controls.
1660-13A11
The 1660-13A11 thermostat is a watertight, dust tight and corrosion resistant temperature control in a light weight die cast enclosure with an internal calibrated reference dial and tamper-proof adjustment for outdoor or indoor locations.
The liquid-filled thermal system, with its stainless steel bulb and capillary, provides a very dependale and accurate control system.
- Die Cast aluminum with polyamid epoxy coating
- Watertight, dust tight and corrosion resistant
- Nema 4X
- SPDT UL listed with internal calibrated reference dial and tamper-proof adjustment
- 22 amps at 480 VAC
- Range – 25° – 325°F
- Sensor – 10 Ft. 304 SS capillary with 1/8″ ss bulb
TF4X40 Thermostat
These thermostats are used for controlling heat tracing systems in ordinary location. The capillary bulb should be mounted on the side of the pipe.
The TF4X40 is used for controlling heat tracing systems in ordinary locations. The capillary bulb should be mounted on the side of the pipe.
- Economical Pipe Sensing Temperature Control
- Electrical Data 22 amp resistance 250VAC
- Single Pole Single Throw
- Nema 4X, IP66 corrosion resistant
- Capillary Length 3ft
- Material Copper
- Max Bulb Temp 60°F (140°C)
- Watertight
- Fixed Temperature Range 40° F (4.4° C)
Freeze Protection Thermostat
The C-UL-US listed SST-1A and SST-2 Freeze Protection Thermostats replace electromechanical thermostats in cost-sensitive applications requiring ground fault equipment protection (GFEP). The sst-1A and SST-2 ate listed by Underwriters Laboratories to Standard UL 873 for Temperature-indicating and –Regulating Equipment.
